True Line Collision

Concept design by Medeiros Web Design. True Line Collision is a fictional business.

Six stations, from estimate to keys.

Every car at True Line moves through the same six stations, and you get a text with a photo each time yours moves. Most repairs take five to ten working days.

What happens at each station

Here is what is done at each one, and about how long a car spends there on a typical front-corner repair.

  1. Estimate20 minutes

    We photograph the damage, read any fault codes and write a line-by-line estimate while you wait.

  2. Teardown1 day

    Damaged panels come off so we can see behind them. Anything hidden is photographed and added, with a call to you first.

  3. Body and frame2 to 4 days

    The structure is measured by laser and pulled back to the factory numbers. New panels are fitted and gaps set.

  4. Paint2 days

    Primer, color and clear go on in the booth, and the finish is baked at 140 degrees.

  5. Reassembly1 day

    Lights, trim and sensors go back on, and the cameras and radar are recalibrated.

  6. Detail and pickupHalf a day

    A test drive, a wash, and a walk around the car with you before you sign.

What does collision repair cost?

A bumper repair runs $450 to $900 and a new door skin $1,200 to $2,000, painted. The estimate is free and firm unless teardown finds more.

Common repairs, parts, labor and paint
RepairUsual costUsual time
Bumper cover repaired and painted$450 to $9002 to 3 days
Bumper cover replaced$900 to $1,6003 to 4 days
Fender replaced and blended$1,100 to $1,9004 to 5 days
Door skin or door shell$1,200 to $2,0005 days
Quarter panel repair$1,800 to $3,5006 to 8 days
Frame pull and measure$600 to $1,5001 to 2 days
Headlight and bracket$350 to $1,2001 day
Clean body shop with a white paint booth with four glass doors, and a technician working on a gray wagon up on a frame rack with its rear bumper off

The equipment that does it

  • Laser measuring Reads forty points on the structure against the maker's numbers, to within a millimeter.
  • Frame rack Holds the car at four points while hydraulic towers pull the structure true.
  • Downdraft booth Filtered air flows from ceiling to floor, so dust never settles in wet paint.
  • Scan tools Every car is scanned before and after, and the two reports go in your file.

How you hear from us

  1. A text with a photo each time the car changes station.
  2. A call before any extra work is done.
  3. A new pickup date the same day a part is delayed.
  4. A text when the car is washed and ready.
What if a part is back-ordered?
We tell you the day we learn of it. If the car is safe to drive, you can take it home and come back when the part lands.
Can I come and look?
Yes, any weekday. Ask at the front and a tech walks you back to your car.
What do I get at pickup?
The final bill, both scan reports, the measuring printout and the warranty, in one folder.

Repair questions

Why did the price go up after teardown?

Because damage behind a panel cannot be seen until the panel is off. We photograph what we find, send it to you and the insurer, and wait for a yes.

Is a car safe after frame repair?

Yes, when it is pulled to the maker's measurements and the printout proves it. If the structure cannot be brought back, we say so and the insurer totals the car.

Do you work on aluminum and electric cars?

Aluminum panels, yes, in a separate bay with its own tools. Electric cars, yes for body and paint; the battery is isolated by a trained tech first.

Can I drive my car while I wait for parts?

Often. If the lights, the hood latch and the wheels are sound, we order the parts and book you in for the day they arrive.

Start at station one

Drive in any weekday between 7:30 AM and 5:30 PM, or Saturday before noon. The estimate takes 20 minutes and costs nothing.

Get a free estimate Call (555) 555-5555