Dovetail Cabinet Co.

Concept design by Medeiros Web Design. Dovetail Cabinet Co. is a fictional business.

Three coats, sprayed in our own booth

Stain or paint, and how the finish goes on.

The finish is what you touch every day, and it is where cheap cabinets fail first. Here is how each wood takes color, how we spray, and how to look after it.

Which finish suits which wood

How each wood takes a finish
WoodBest finishGood to know
Red oakStain, light to darkThe open grain shows through paint, which some people like
Hard maplePaintSmooth and tight, but dark stain can go blotchy on it
CherryClear coatIt darkens to a deep red by itself in the first year
HickoryClear coat or a light stainThe light and dark streaks are the point, so do not hide them
Black walnutClear coatWe never stain walnut. It is already the color people stain other woods to get
Tall stacks of rough-sawn boards drying in a lumber yard, separated by thin sticks so air can move between them

From the sawmill to the shop

Your wood is ordered the week you sign, from a sawmill an hour east of Seymour. All of the walnut and most of the oak and hickory grew in Missouri.

  • Kiln dried Boards are dried to about 7 percent moisture so they do not shrink in a heated house.
  • Rested They sit in our shop for two weeks to get used to indoor air before we cut them.
  • Matched The boards for your doors are picked by eye so the color and grain agree across the kitchen.

What happens in the booth

  1. Step 1SandEvery door and face frame is sanded smooth by machine and then by hand.
  2. Step 2ColorStain is wiped on and off, or primer is sprayed for a painted job.
  3. Step 3Seal and sand againA sealer coat locks in the color, then a fine sanding knocks down the grain.
  4. Step 4Two top coatsA hard cabinet varnish, sprayed a day apart.
  5. Step 5CureFive days on the racks before anything is wrapped for delivery.
Finisher in a white suit and respirator spraying a coat of finish onto a flat panel with a spray gun

Painted cabinets, honestly

Paint looks clean and suits almost any house, and it is what half our customers choose. Two things are worth knowing first.

Looking after the finish

Do and do not
Every weekWipe with a soft cloth, damp with water and a drop of dish soap, then dry
SpillsWipe up within the hour, above all near the sink and dishwasher
Never useSpray polish, wax, bleach or a scrubbing pad
In winterKeep the house between 35 and 55 percent humidity if you can
If it is damagedCall us. Finishes and hardware are covered for five years

Asked about wood and finish

Can you match the stain on my trim or floor?

Bring a piece of trim or a floor vent cover to the shop. We make sample boards until one disappears against it.

Will my house smell of finish?

No. All of the spraying and curing happens in our booth, so the cabinets arrive with no smell.

Can I change the color in ten years?

Yes. Doors and drawer fronts come back to the shop for sanding and a new finish, and the frames are done in your home. It takes about two weeks.

Colors look different on a screen

Come and see them on real wood.

Every wood, stain and paint color we use is on the showroom wall. Take a sample door home for the weekend and look at it in your own light.