Hardwood floors.
Nothing else looks like it, sounds like it underfoot or can be sanded back to new in thirty years. Here is what to choose and what it costs installed.
Solid or engineered?
| Question | Solid | Engineered |
|---|---|---|
| What it is | One piece of wood, three-quarters of an inch thick | A real wood layer on a plywood core |
| Where it goes | Over a wood subfloor, above ground | Anywhere, including over concrete and in basements |
| Can be refinished | Five or six times | One to three times, by the thickness of the top layer |
| With the seasons | Gaps a little in winter, tightens in summer | Moves much less |
| Installed | $9 to $15 a square foot | $8 to $14 a square foot |
Sample prices for this concept site. Most Springfield houses on a slab get engineered.
Which wood
- White oak. The favorite for ten years running. Hard, calm grain, takes any stain.
- Red oak. A little pinker and a little cheaper. What is under the carpet in most older houses here.
- Hickory. The hardest we sell, with wild light and dark streaks. Good with big dogs.
- Maple. Pale and smooth. Shows scratches less than you would think, and stains unevenly.
- Walnut. Dark and beautiful, and soft. For rooms without high heels or toy trucks.
Four choices after the wood
- WidthNarrow strips of two and a quarter inches look traditional. Five inches and wider look current, and show seasonal gaps more.
- FinishMatte hides dust and scratches. Gloss shows everything. Nearly everybody now picks matte or satin.
- TextureSmooth, wire-brushed or hand-scraped. A brushed floor hides a dog's claw marks.
- Site or factory finishedFactory finish is harder and done in a day. Sanded and finished in the house takes a week, and has no bevels between boards.
Herringbone and chevron
- Herringbone: square-ended boards laid in a zigzag. $4 to $6 a square foot over a straight lay.
- Chevron: ends cut at an angle, so the boards meet in points. $6 to $8 over.
- Both need 15% extra material for cuts.
- Both suit one room, an entry or a dining room, more than a whole house.
- Two of our installers lay them. Ask to see photos of their last three.
Living with hardwood
- It will scratch. In five years it has a patina, and you stop seeing them.
- Water is the enemy. Wipe spills, and do not wet mop. A damp cloth and a hardwood cleaner.
- Humidity matters. Keep the house between 35 and 55 percent, and the boards stay tight.
- Felt under everything. Chairs do more damage than dogs.
- Rugs at the doors catch the grit that works like sandpaper.
- Not for full bathrooms or laundry rooms. Powder rooms are fine.
What our price includes
- Tear-out
- Old carpet, pad and tack strip, hauled away.
- Subfloor
- Screwed down where it squeaks, and leveled where it dips.
- Underlayment
- A moisture barrier, and a sound layer on upper floors.
- Trim
- Baseboards taken off and put back, or new quarter-round, caulked and painted.
- Transitions
- A finished strip at every doorway to tile or carpet.
- Doors
- Trimmed if the new floor is taller.
Is hardwood right for the room?
Tick what is true. Four or more, and yes.
Asked about hardwood
Can hardwood go in a kitchen?
Yes, and half our kitchens get it. Use a mat at the sink and fix a dishwasher leak the day you see it.
How long does it take?
Factory-finished, two to three days for a main floor. Sanded and finished in the house, about a week, with two days you cannot walk on it.
Will new wood match my old floor?
Close, if we know the species and stain. For a real match, we lace new boards in and refinish the whole room together.
Does it add value to the house?
Estate agents here list hardwood first for a reason. Buyers pay for it, and they do not pay for carpet.
See the boards in your own light.
Take up to five samples home, free. Lay them by a window and look at them morning and evening.