Concept design by Medeiros Web Design. Fieldhouse Furniture is a fictional business.
Made to order.
Half of what we build is not in the catalog. A table an inch narrower, a bed for a low attic, a bench to fit a bay window. If it is solid wood and joined, we will draw it.
Page 34
From a sketch to your door
1. Bring an idea
A photograph, a magazine page, a pencil sketch or only the size of the gap it has to fill.
2. A drawing, free
Within a week: front, side and top, with every measurement and a fixed price.
3. A quarter down
Starts the order. We pick the boards and send you a photo of them.
4. Six to eight weeks
You are welcome in the shop any Saturday to see it. Then we deliver and set it in place.
Changes to a catalog piece
| Change | What it costs | Good to know |
|---|---|---|
| Length or width of a table | The same price a foot | Six to ten feet long, 36 to 44 inches wide |
| Height | No charge | Counter height, or lower for a wheelchair |
| A different wood | Walnut and cherry add about a fifth | Maple and ash cost the same as oak |
| A different finish | No charge | Any of the four, or matched to a sample for $90 |
| Sofa length | $120 a foot, longer or shorter | From 60 to 108 inches |
| Seat depth or firmness | No charge | Decided on the showroom samples |
| Your own fabric | $60 off | We need 16 yards for a sofa. Bring the bolt |
Page 36
Things we have built
- A twelve-foot table
- In two halves that bolt together, for a family of nine and a dining room with a narrow door.
- A window seat
- With three drawers under it, scribed to a wall that was an inch out of plumb.
- A bed for a tall man
- Seven feet long, with the mattress made to match by a firm in Joplin.
- A church lectern
- In walnut from a tree that came down in the churchyard.
- Forty library chairs
- Stackable, for a college reading room. The first chair took a month. The rest took six weeks.
Beds and bedrooms
- The Panel Bed
- A solid headboard and a low foot. Queen $1,980, king $2,340.
- The Spindle Bed
- Turned spindles head and foot. Queen $2,260.
- The Platform Bed
- No box spring needed. Slats every three inches. Queen $1,540.
- Rails that do not squeak
- Bed bolts into steel nuts, not hooks. Tighten once a year.
- Dressers
- Dovetailed drawers on wooden runners, waxed. Six drawers, $2,180.
- Nightstands
- One drawer and a shelf. $460 each, at the height of your mattress.
Your own tree, or your own boards
- A tree that came down
- A walnut or oak from the family place can become a table. It has to be sawn and then dried for a year for each inch of thickness.
- Barn wood
- Beams and boards from a family barn make fine tops and mantels. We check for nails, rot and powder-post beetles first.
- An old piece
- Grandmother's table that is too small can give its top to a desk, or its legs to a new, longer top.
- What it costs
- The labor is the same as with our wood. You save the lumber, about a fifth of the price.
Restaurants, offices and churches
- Restaurant tables
- Tops with a hard commercial finish that takes sanitizer. From $380 for a two-top.
- Conference tables
- With a channel for cables. Eight to sixteen feet.
- Reception desks and counters
- Built in the shop and fitted on site.
- Pews and communion tables
- Repaired, matched or built new.
- Designers
- A trade price and a sample kit. Ask for the trade sheet.
Bring these for a drawing
Asked about custom work
Is the drawing really free?
Yes. If you do not go ahead, keep it. We would rather draw ten pieces and build six than have anyone guess.
Can I change it once you have started?
Until the boards are cut, freely. After that, changes cost what they cost in wood and time, and we tell you first.
What if I do not like it?
You see the drawing, the boards and the piece in the shop before it leaves. In twenty years, two pieces have come back, and we remade both.
Do you ship?
We deliver ourselves within 50 miles. Further, a blanket-wrap furniture carrier takes it, at their rate, with our crating.
Bring the sketch.
Or only the measurement of the gap. The drawing is free and comes within a week.