5 inch K-style
Right for most one-story roofs with an ordinary pitch. Carries about 5,500 square feet of roof per downspout in a normal storm.
$9 to $11 a foot
Concept design by Medeiros Web Design. Rainline Gutters is a fictional business.
A gutter leaks at its joints. So we make each run in one piece, cut to the inch, beside your house. Here is what goes into a job and what it costs.
Ours is .032 inch thick. Much of what is sold is .027, which dents under a ladder.
Screwed into the rafter tails every two feet. Not spikes, which pull out in five winters.
A quarter inch of fall for every ten feet. Too little and water stands. Too much and it looks crooked.
One for every 35 feet of gutter, and one at each end of a long run.
The only joints there are. Riveted, then sealed inside with a gutter sealant that stays flexible.
Metal flashing tucked under the shingles and into the gutter, so water cannot run behind it.
Right for most one-story roofs with an ordinary pitch. Carries about 5,500 square feet of roof per downspout in a normal storm.
$9 to $11 a foot
For steep roofs, metal roofs, two stories draining onto one, or anywhere the 5 inch overflows. Uses 3 by 4 inch downspouts.
$11 to $14 a foot
For older houses and farmhouses. Hung on round brackets, with round downspouts. Aluminum or copper.
From $15 a foot
Prices include downspouts, hangers, corners and hauling the old gutters away. Sample prices for this concept site.
| House | Gutter | Downspouts | Total |
|---|---|---|---|
| Ranch, 1,400 square feet, gutters front and back | 120 feet | Four | About $1,250 |
| Two-story, 2,200 square feet, all four sides | 190 feet, 6 inch | Six | About $2,500 |
| Farmhouse with a wraparound porch | 260 feet, half-round | Eight | About $4,200 |
| Detached garage or shop | 50 feet | Two | About $520 |
Gutters the color of the fascia disappear. That is usually what you want.
On a house with a dark roof and light walls, dark gutters read as part of the roofline.
A white downspout on red siding draws the eye. One the color of the siding does not.
Baked on at the mill. No painting, ever. We hold the samples against your house.
Starts bright, goes brown in a year and green in fifteen. About three times the price of aluminum.
| What we find | What we do | Cost |
|---|---|---|
| Sound fascia | Hang the gutters | Nothing extra |
| Peeling paint, wood still hard | Prime the bare spots before the gutter goes on | Nothing extra |
| Soft or rotten boards | Cut out and replace with primed pine or PVC board | $8 a foot |
| No fascia, open rafter tails | Roof-mount straps, or add a fascia board | $3 to $7 a foot |
| Fascia wrapped in aluminum | Hang through the wrap into the wood behind | Nothing extra |
Against leaks, rust-through and the finish peeling.
If a hanger loosens or a corner drips, we come back and fix it free.
Once, with a phone call.
Damage from fallen limbs, ladders leaned on the gutter or ice dams from an under-insulated attic.
A sectional gutter has a joint every ten feet, and each one leaks in time. A one-piece run has joints only at the corners and ends.
Twenty-five to thirty years here, if they are kept clean. They do not rust.
Yes, in 6 inch. Water comes off metal fast, and snow slides. We set them a little lower and add snow guards if needed.
For the first ten minutes, to confirm the color and where the downspouts go. After that, no.
Estimates are free, written and good for sixty days.