Panel upgrades and house wiring.

The panel is the heart of the house. When it is too small, too old or one of the brands that fail, everything else is working on borrowed time.

When a panel needs replacing

  • Call today

    Rust, scorch marks or a hot cover

    Water or heat has been inside. It will not get better.

  • Call today

    A fuse box with pennies or foil

    Somebody defeated the fuses. The wires have no protection.

  • This year

    A panel on the recall lists

    A few brands from the 1950s to the 1980s have breakers that fail to trip. We tell you if yours is one.

  • This year

    No room for another breaker

    Doubled-up wires and tandem breakers everywhere.

  • Plan for it

    100 amps, and plans

    An EV, a hot tub, a shop or a heat pump will need more.

  • Plan for it

    Sixty amp service

    Common in houses before 1960. Many insurers now ask about it.

What it costs

With the permit, the inspection and the utility visit. Sample prices for this concept site.

Panel and service work
JobWhat it isPrice
Panel swap, same sizeA new 100 or 200 amp panel on the existing service$1,900 to $2,600
Upgrade to 200 ampsNew panel, meter base, service cable and grounding$3,200 to $4,400
SubpanelA second panel for a garage, a shop or an addition$850 to $1,600
Grounding and bondingNew ground rods and a bond to the water line$380
Arc-fault breakers, a whole panelBreakers that trip on a sparking wire$60 a circuit

Panel jobs can be split into monthly payments. Ask when we give you the price.

Panel day

The power is off for about six hours, usually 8 AM to 2 PM.

  1. The utility pulls the meter

    We book this. Everything in the house goes off.

  2. The old panel comes out

    Every wire is tagged with its circuit before it is moved.

  3. The new one goes in

    New breakers, new grounding, and every connection tightened to its rated torque.

  4. The inspector looks

    We meet them. You do not need to be home.

  5. Power is back

    With a typed list of every circuit on the panel door.

How big a service do you need?

  • 100 amps runs a gas-heated house with ordinary appliances.
  • 150 amps adds central air and an electric range comfortably.
  • 200 amps is the standard for new houses, and what an EV charger or a heat pump wants.
  • 320 or 400 amps is for all-electric houses with a shop or two EVs.
  • We work it out with a load calculation, on paper, and leave you a copy.
Row of round electric meters mounted on a wall of metal boxes

Old wiring

What is behind the walls, by the age of the house
WiringBuilt aboutWhat we advise
Knob and tubeBefore 1940Replace it. Insulation in the attic makes it overheat
Cloth-covered cable1940 to 1960Check it. Replace where the cloth is brittle
Two-wire, no groundBefore 1965Add grounded circuits where electronics plug in
Aluminum branch wiring1965 to 1973Keep it, with approved connectors at every outlet and switch
Modern copper cableAfter 1973Usually fine. Add GFCI and arc-fault protection

An inspection of the whole house takes about an hour and costs $145. You get a written list in order of urgency.

Remodels and additions

  • Kitchens need two counter circuits, and one each for the fridge, dishwasher, disposal and microwave.
  • Bathrooms need their own 20 amp circuit and a fan vented outdoors.
  • Finished basements need arc-fault protection and an egress light.
  • We work with your builder, or pull the permit ourselves if you are your own contractor.
  • Rough-in and finish are two visits, with an inspection after each.

Before panel day

Asked about panels

Do I need a permit?

Yes, and we pull it. The city inspects the work, and we are there for it.

Will my insurance want this done?

Insurers often ask about fuse boxes, 60 amp service and the recalled brands. A new panel with a permit answers the question.

Can you add circuits without a new panel?

If there are open spaces and the load allows it, yes. We check both before we quote.

How long does a 200 amp panel last?

Forty years or more. The breakers may need replacing sooner.

Not sure about your panel?

Send a photo of it with the door open. We will tell you the brand, the size and whether to worry.